PROGRAM of ETCC2020 European Technical Coatings Congress |
||||||
ORAL PRESENTATIONS |
||||||
03 September 2021 |
||||||
| 08.45-09.00 | ETCC2020 Opening Ceremony | |||||
| 09.00- 09.45 | PLENARY SESSION K.Kruithof, Netherlands Creating Value through Innovation and Collaboration |
|||||
| 09.45-10.30 | PLENARY SESSION M.Soucek, USA Advances in Self-Stratified Coatings |
|||||
| 10.30-11.00 | Coffee Break | |||||
| Parallel SESSION 1 | Parallel SESSION 2 | Parallel SESSION 3 | Parallel SESSION 4 | Parallel SESSION 5 | ||
|
11.00 - 12.30 |
A4.3 M.Sibi, USA Synthesis of Biomass Derived Monomers for Coating and Polymer Applications |
B1.1 V.Gutowski, Australia Electroconductive and adhesion-promoting interphases |
C2.1 F.Doğan, Turkey Investigation of structural and corrosion properties of pulse electrodeposited Ni-B/SWCNT composite coating. |
A12.3 A.Francis, USA Modern Weathering Testing of Paints and Coatings: Fluorescent UV & Xenon Arc |
A16.3 B.Münzing, China Innovative Coating Products with Graphene |
|
| A5.1 G.Gaggero, Italy Rheological properties and application performances of water-based paints containing alginates |
B1.2 H.Bi, Denmark Coating degradation and rust creep assessment - A comparison between a destructive method according to ISO 12944 and selected non-destructive methods |
C2.2 S.Plebst, Germany Ionic Liquids and Nanomaterials Dispersions – Innovative Additives for Coatings and Paints |
A12.2 A.Schoenlein, Germny Laboratory Weathering with H2O2 Spraying |
A17.3 N.Guy, France Design of an acrylic photoresist for cataphoresis process |
||
| A5.2 G.Delmas, France Surface-controlled waterborne binders for improved HEUR & HASE thickeners efficiency to achieve optimum paints rheological profile |
B1.3 I.Cabrera, Germany Quick curing mechanisms for architectural all-season coatings |
C2.3 A.Sahut, France Isosorbide and derivatives for bio-based and performants coatings |
A12.1 M.Osterhold, Germany Scratch/Mar, Surface Structure and Rheology Measurements |
C10.3 W.Tomal, Poland From the synthesis of new biphenyl photoinitiators to the formation of highly cross-linked polymer products for 3D printing and coating industry |
||
| 12.30-13.30 | Lunch Break | Parallel SESSION 6 | ||||
|
13.30-15.00 |
A2.1 P.Najmi, Iran Using mixture experimental design to study the effect of epoxidized soybean oil acrylate oligomer on UV cured epoxy acrylate resins |
B2.1 B.Liu, China Preparation and application of fluorescent probe enhanced by quantum dots for early corrosion detection at carbon steel/coating interface |
C4.1 S.Rossi, Italy Durability and aesthetical properties of acrylic cataphoretic coatings admixed with silica powder and thermochromics pigments |
A.9.1 S.Kirsch, Germany Interaction and diffusion phenomena in 2K water-borne polyurethane systems for industrial coatings |
A21.2 R.Czarnecki, USA Aluminum oxide nanocomposite wax powders for improved scratch resistance |
A5.3 M.Smiglak, Poland Implementation of additives from renewable sources in epoxy composites with lower negative environmental impact |
| A2.2 R.Nothhelfer-Richter, Germany Comparative investigations of UV curing coatings using LED- versus Hg-lamps |
B2.2 A.Franczyk, Poland Synthesis of new organosilicon derivatives for coating applications |
C4.3 V.Kurbatov, Russia The investigation of core-shell pigments properties based on inorganic fillers and polyaniline |
A9.3 M.Bourguignon, Belgium Water-based and CO2-sourced polyhydroxyurethane coatings |
A21.1 M.Fernández-Álvarez, Spain Manufacture and characterization of polyamide coatings with silica nanoreinforcements |
A7.2 U.Gumsheimer, Germany Colourful solar modules: Interference layer for low power loss |
|
| A2.3 D.Ehrhardt, Belgium Self-healing UV-curable polymer network layers for photovoltaic applications |
B2.3 S.Beuck, Germany Silane functional polyisocyanates and prepolymers and their coating applications - A novel approach |
C5.1 A.Okkel, Germany Modelling of wetting & dispersing additives |
A9.2 W.Paulus, Germany 1K Crosslinking System for Polyurethane Dispersions |
A16.1 E.Langer, Poland Mechanisms of protection by coatings with a reduced content of zinc pigments |
A6.3 M.Ebrahimi, Iran Preparation, Characterization and Microencapsulation of Coconut oil/ Graphene Composite as PCM for Thermal Energy Storage |
|
| 15.00-15.30 | Coffee Break | |||||
|
15.30-17.00 |
A3.1 Y.Nagazi, France A novel method for coatings characterization at high temperature |
B3.1 M.Widrat, Germany Graphene-Based Anti-Friction Coatings |
C4.2 M.Calovi, Italy Cataphoretic deposition of organic coatings with functionalized graphene oxide flakes |
A10.1 C.Uzoh, Nigeria Appraisal of Mathematical Modeling of Alkyd Resin Polycondensation Reactor |
A19.1 Huzaifa Matawala - Paint Recyclist-Regent paints, USA Maximum Sustainability |
A7.3 M.Gedan-Smolka, Novel polyetherimide (PEI) antifriction coatings with chemical bonded PTFE as lubricant |
| A7.1 O.Tiedje, Germany Paint properties for oversprayfree painting technologies based on drop on demand principles |
B3.2 R.Wollrab, Slovenia Novel Polyester Resins for Coil Coatings |
C9.1 HJ.Jacob, Germany Vacuum Inline Dispersion saves Titanium Dioxide and inducts dust free |
A10.2 A.Królikowska, Poland Carelessnes in morphology design can affect organic coatings performance |
A19.2 L.Heinrich, Germany Sustainable binder material for offset printing inks based on lignin: Synthesis, properties, application |
A3.3 K.Wojtas, Poland Computational fluid dynamics of particle break-up in a new type of industrial batch homogenizers |
|
| A4.1 L.Eijsink, Netherlands Operando spectroscopy of vinyl-ester styrene resin curing in the development of new catalyts |
B3.3 B.Toirac, Spain Sol-gel coatings with release of linezolid and cefoxitin as a combined therapy of prosthetic joint infections caused by staphylococci |
C8.2 T.Lys, Switzerland New generation of Functional Minerals – Improvement of architectural paints properties by morphology – controlled calcium carbonates |
A10.3 M.Vitale, Italy LIFE-BioPaint: demonstration of an innovative process for paint production with minimal environmental impact |
A8.2 M.Dahmen, Germany Laser-based processing of polymeric protection coatings for lightweight applications |
A8.3 R.Krzosa, Poland Population balance equation model of deaggregation process carried out in high–shear dissolvers |
|
04 September 2021 |
||||||
| 09.00- 09.45 | PLENARY SESSION S.Herrwerth, Germany New solutions for Coatings: Taking you on a journey from current developments to future trends and beyond |
|||||
| 09.45-10.30 | PLENARY SESSION A.Rössler, Austria Functional wood coatings - Challenges and opportunities |
|||||
| 10.30-11.00 | Coffee Break | |||||
| Time | Parallel SESSION 1 Session LACKCHEMIE |
Parallel SESSION 2 | Parallel SESSION 3 | Parallel SESSION 4 | Parallel SESSION 5 | Parallel SESSION 6 |
|
11.00 - 12.30 |
B6.1 B.Strehmel, Germany Physical and Chemical Drying of Diverse Coatings Comprising Green Photocatalysts and Alternative Absorbers covering the UV, Blue and NIR Range with New LED Techniques | B4.2 E.Bertin,France The impact of minerals on the stain resistance of water based decorative matt paints |
C10.1 E.Duru, Turkey Corrosion and wear behaviour of Ni-B/Al2O3 composite coating by electrodeposition on stainless steel substrate. |
A1.2 N.Rajagopalan, Denmark Barrier properties of an epoxy novolac resin system under conditions of high pressure and high temperature: Influence of inorganic fillers and its morphology |
A6.1 N.Farshchi, Germany Self-healing through Diels-Alder Reaction in uretdione based powder coating |
A11.1 C.Uzoh, Nigeria Synthesis of Rubber Seed Oil Waterborne Alkyd Resin from Glucitol |
| A21.3 M.Gedan-Smolka, Germany Multi-functional organic coatings-fundamentals and application oriented research at the IPF |
B4.3 V.Strehmel, Germany Wetting of Polymeric Binders Derived from Traditional and Ionic Polymethacrylates |
C6.1 M.Zielecka, Poland Recent achievements in silicone-based flame resistant coating materials |
A22.3 V.Gutowski, Australia Multi-modal superhydrophobic coatings for self-cleaning, icephobic, |
C1.2 N.Kargarfard, Germany Eco-friendly self-stratifying powder coating materials with corrosion resistance and weather protection property |
A15.2 S.Van Loon, Netherlands Digitalization of formulation developments via predictive sciences |
|
| C8.1 W.Bremser, Germany Coatings, Materials and Polymers |
B4.1 J.Trzaskowska, Poland Aqueous silicone-acrylic/styrene and acrylic/styrene-silicone dispersions with hybrid particle structure for coating applications |
C6.2 G.Durand, United Kingdom Fluorine free superhydrophobic coatings and surface treatments: addressing the durability challenge |
A23.1 S.Yomo, Japan Improving appearance of multilayer coating films for automotive bodies |
13.1 M.Groenewoud, Netherlands Novel Catalyst for Reduced Temperature Cure Powder Coatings |
A15.3 AH.Bonardi, Germany Digital model as a tool to accelerate development of coating formulation recipes |
|
| Lunch Break | ||||||
|
13.30-15.00 |
A14.1 M.Hilt, Germany Paints, Coatings and Varnishes – a Research and Development Focus of Fraunhofer Gesellschaft |
B5.1 M.Vogel, Germany Toughen your Architectural formulations with innovative particles - Novel Synthetic Silica Engineered for Improved Durability and Burnish Resistance |
T.Zieliński Keynote Speaker, Poland Trends and challenges – new business model of chemical Industry in Europe |
D2.1 B.Erich - Keynote Speaker, Netherlands Solar control coatings for heat harvesting of building façades |
A13.2 M.Cudazzo, Germany Increase of powder coating quality and material efficiency by the use of a new smart control process |
A19.3 S.Buchbach, Germany A Holistic Concept for Coating Monitoring and Maintenance on Offshore Wind Power Constructions |
| A14.3 V.Stenzel, Germany Fraunhofer IFAM -From Raw Materials to Functional Coatings |
B6.3 Z.Bojarska, Poland Designing hybrid nanocomposites based on molybdenum disulphide and carbon nanomaterials for enhanced photo-electrocatalytic properties |
C.Davidson - Keynote Speaker, Belgium Paint it green. The EU initiatives that the paint industry is facing |
D2.2 H.Yahyaei, Iran The effect of castor oil on properties of carboxy methyl cellulose based edible coating |
A13.3 M.Cudazzo, Germany Thermally conductive powder coatings |
||
| A14.2 M.Hilt, Germany Coatings Research and Development at Fraunhofer IPA |
B7.1 V.Fritzemeier, Switzerland Genagen COA VOC-Free Coalescing Agent for Emulsion Paints |
J.Akkerman Keynote Speaker, Netherlands 36 Years of paint and resin innovation |
D2.3 D.Wojda, Poland Colour durability of PUR topcoats – how to choose durable colour? |
B8.1 M.Bosma, Netherlands Appearance of powder paints |
||
| 15.00-15.30 | Coffee Break | |||||
|
15.30-17.00 |
B7.3 O.Strube, Germany Beyond Sustainability – Bioinspired Coating Innovations |
A17.1 T.Brock, Germany Autodeposition Coatings – an Alternative to EDC? |
C3.3 R.Severac, France Rediscovering the unique versatility of alkanolamines to optimize next-generation paint formulations |
D1.1 T.Wieckowski, Poland Coatings Appearance Measurements – new developments and trends |
B8.2 B.Pilch-Pitera, Poland New biobased polyurethane powder coatings for painting low temperature resistance substrates |
|
| C3.1 M.Groteklaes, Germany Introduction to the German Research Landscape for Coating Chemistry and Technology |
B5.3 D.Golotta, |
C1.1 B.Naden, United Kingdom Enhancing sustainability in the manufacture and disposal of paints and coatings |
D1.2 H.Yahyaei, Iran PhotoDSC study of Titanium Dioxide Pigmented UV-cured Coatings: Anatas Polymorph against Rutile Polymorph |
C1.3 D.Czachor, Poland UV curable biobased powder coatings |
||
| C11.3 C.Schmitz, Germany Teaching and Research at the Niederrhein University |
C10.2 N.Salazar, Spain Cold Gas Spray (CGS) as a Novel Technology to Apply Thermoplastic Coatings |
C5.3 S.Ulf, Germany Will the Smart Paint Factory Eliminate the Need for Lab Personal Within the Next 5 Years? |
D1.3 T.Karavayev, Ukraine Use of the Ukrainian Mineral Fillers in Water-Dispersion Paints Composition |
A6.2 C.Schreiner, Germany Liquids in Powder “LIP” – results of a CORNET project |
||
05 September 2021 |
||||||
| Parallel SESSION 1 | Parallel SESSION 2 | Parallel SESSION 3 | Parallel SESSION 4 | Parallel SESSION 5 | ||
|
09.00-10.30 |
A11.3 C.Webster, USA Coatings binder systems from high functionality bio-based seed-oil derived resins |
B5.2 M.Vogel, Germany Optimization of wet and dry hide in Architectural paints |
C5.2 MY.Heuer, Germany VOC-Toolbox – More Freedom for Coatings Formulators |
A20.1 M.Farooq, Netherlands ZEFFLE-GKD: A water-borne 2-component fluorinated dispersion polymer for highly chemical resistant and long-lasting coatings |
A22.1 C.Bauder, Germany Photocatalytic active coatings for air purification |
|
| A11.2 P.Van Waes, Netherlands Reduced carbon footprint without compromise on quality with Tall Oil Fatty Acid for alkyd resins |
B6.2 E.Hola, Poland Novel versatile bimolecular photoinitiating systems for coating industry and 3D printing application |
C3.2 P.Wrona, Poland Novel curable waterborne polyurethane cationomers |
A20.2 D.Ressnig, Switzerland Acrylic Emulsion Binder Extending the Aesthetics & Durability of Façade Coatings |
A22.2 A.Rabajczyk, Poland Modern building materials for the removal of air pollutants |
||
| A18.1 P.Struelens, Belgium Keto fatty acids for faster drying alkyd resins. |
B7.2 G.Kütahya, Germany New Strategies for Coatings 2020: Controlled Polymer Synthesis based in NIR Technologies |
C8.3 M.Heuer, Germany Achieving the next level of durability without reformulation – New hardener for ambient curing high heat resistant coatings |
A20.3 SJ.Bohorquez, Netherlands Assessing the performance of fructose-based electrosterically stabilized latexes in decorative paints |
A23.2 G.Jaunky, Germany New Tools to Tune the Wettability of Multi-layer Coatings! |
||
| 10.30-11.00 | Coffee Break | |||||
|
11.00-12.30 |
A4.2 S.Govers, Netherlands Surface segregation of silicon-containing block copolymers in coatings |
C11.2 A.Rybak, Poland Functional coatings for sand printed moulds for casting of electrical insulation in energy distribution systems |
C7.2 M.Martinez, Spain Bugphobic coatings with omniphobic properties for aerodynamics surfaces |
C11.1 M.Topa, Poland Production of polymer coatings by photopolymerisation using novel, effective photoinitiators and simultaneously colorimetric sensors to control the quality of the process |
A17.2 T.Krawczyk, Germany Characterization of water and electrolyte transports in autophoretic corrosion protection coatings |
|
| A1.1 N.Taleghani, Iran The synergic effect of SAPP and sodium molybdate in an organic coating on corrosion resistance of galvanized steel | C7.1 M.Heuer, Germany More Durability of Coatings by Enhancing Scratch and Abrasion Resistance |
C6.3 S.Jurczyk, Poland Prediction of protective properties of coatings based on glass transition temperature value |
A18.3 U.Schoknecht, Germany The impact of weather conditions on biocides in paints |
A16.2 J.Lach, Poland Anticorrosive coating materials based on Zn–particles |
||
| A1.3 K.Szubert, Poland Anti-corrosive properties of organofunctional alkoxysilane coatings | A15.1 K.Cremanns, Germany Smart Automation - Machine Learning Guided Product Development |
C7.3 C.Lanzerstorfer, Austria Effect of coatings with respect to powder wall friction |
A3.2 E.Reuter, Germany High Throughput support for optimization of high quality pigment preparations |
A18.2 E.Matušková, Czech Republic Mn(acac)3 as an alternative to cobalt driers in alkyd binders |
||
| 12.30-13.30 | Lunch Break | |||||
| 13.30-14.15 | PLENARY SESSION T.May, Germany What is the Appropriate Response of the Coatings Industry with Regard to the Ongoing Process of Reclassification of Compounds? |
|||||
| 14.15-15.00 |
ETCC2020 Awards & Closing Ceremony |
|||||
| ETCC2020 EXHIBITION SESSIONS available on 03-05 September 2021 within the congress time. | ||||
| POSTERS PRESENTATION SESSION on 03-05 September 2021 | ||||
|
1 |
J.Bootsma, Netherlands On the development of new Fe-based driers for alkyd curing |
|||
|
2 |
JM.Kim Korea, South Study on the effect of modifying the coating system to improve the properties of PCM made of high corrosion resistance coated steel sheets |
|||
|
3 |
M.Zubielewicz, Poland Anti-graffiti properties depending on the value of the free surface energy of coatings |
|||
|
4 |
L.Wagner, Germany Automated characterization of technical surfaces |
|||
|
5 |
Y.Yung Chi, Taiwan The Study of Novel Hybrid Stabilizers against Instant Yellowing during Curing, Weathering, and Heat Resistance for Waterborne UV-curable Coatings |
|||
|
6 |
A.Kalendová, Czech Republic Formulation of paints containing environmentally friendly pigments modified by conductive polymer salts for anticorrosion protection of metallic substrates |
|||
|
7 |
G.Gil Alvaradejo, Norway Versatile dispersing agents for waterborne coatings |
|||
|
8 |
M.Ebrahimi, Iran Effect of epoxidized soybean oil acrylate oligomer composition on UV curable epoxy acrylate formulations: experimental design approach |
|||
|
9 |
T.Poplata, Germany Photoinitiated Radical Polymerization for Generation of High-Crosslinked Layers with Deep Thicknesses |
|||
|
10 |
A.White, Finland Minimizing TiO2 usage in Coatings systems by accurately measuring Wet Hide : Optimization whilst maintaining Wet Hide Performance |
|||
|
11 |
A.Skripinets, Ukraine Vibration absorbing epoxyurethane products and coverings of building appointment |
|||
|
12 |
E.Traply, Hungary Difficulties in PVC/CPVC based formulations of silicon based coatings |
|||
|
13 |
J.Rumpf, Germany Novel cellulose-beeswax-lignin composites as coating material for paper packaging |
|||
|
14 |
C.Castillo, Chile Novel wood preservative compounds based on metallic copper nanotechnology. CCA replacement alternative and new coatings for surface protection. |
|||
|
15 |
S.Waśkiewicz, Poland Self-stratifying coatings based on Schiff base epoxy resins. |
|||
|
16 |
L.Mu, Switzerland Novel Application of Carbodiimide-based System in Coatings |
|||
|
17 |
A.Makarov, Russia Obtaining microcapsules from polymethylmethacrylate for use in protective coatings obtained by electrodeposition |
|||
|
18 |
Y.Guo, United Kingdom The study of graphite/graphene-based conductive ink formulations |
|||
|
19 |
D.Steinerová, Czech Republic Effect of pigments and fillers on properties of new acrylate dispersion containing nanoparticles MgO |
|||
|
20 |
M.Quast, Germany Detection of bacterial contamination of process liquids in painting processes and avoidance by means of environmentally friendly, biocide-free techniques |
|||
|
21 |
J.Ortyl, Poland Development of New High-Performance Photoinitiating Systems and Their Applications in Polymer Coating Industry |
|||
|
22 |
J.Schultz, Chile Antimicrobial protection for surfaces by aqueous low-cost metallic copper nanoparticles. |
|||
|
23 |
M.Nowicka-Nowak, Poland Dirt pick-up resistance for waterborne coatings on wooden and mineral surfaces |
|||
|
24 |
P.Vlasák, Czech Republic Polyglycerine – catalysts for synthesis |
|||
|
25 |
M.Kazemi, Iran Evaluation of pigments volume concentration through different methods resulted from EIS |
|||
|
26 |
W.Janik, Poland Preparation of a flame-retardant polypropylene coating |
|||
|
27 |
N.Skopintseva, Russia The influence of hydroxy-functional polyester on corrosion performance of polyurethane coatings |
|||
|
28 |
J.Karasiewicz, Poland (Poly)siloxanes as precursors of anti-fog materials |
|||
|
29 |
B.Sieredzinska, Netherlands Light-controlled crosslinking in polymers |
|||
|
30 |
D.Łoś, Poland Wood protective coatings prepared with silanes based on fatty acids |
|||
|
31 |
Z.Ranjbar, Iran The effect of n-Hexyl glycol and pigment to binder ratio on deposition behavior and edge coverage of water borne epoxy urethane electrocoatings |
|||
|
32 |
B.Leśniewski, Poland Functional polysiloxanes as effective waterproofing coating materias |
|||
|
33 |
J.Foth, Germany Improved Anti-Fouling Performance in Cuprous Oxide based coatings through incorporation of modified fumed silica |
|||
|
34 |
A.Silaeva, Russia Structure of polymer coatings filled with nanosized particles obtained by the method of cathodic e-coating |
|||
|
35 |
F.Ciesielczyk Poland Coatings with increased hydrophobicity and self-cleaning effect dedicated for laminated structures |
|||
|
36 |
J.Machotová Czech Republic Self-crosslinking acrylic latex with embedded inorganic nanoparticles: Comparison of nanosized ZnO and MgO as ionic crosslinking agents |
|||
|
37 |
S.C.Massmann Netherlands Selective modification of unprotected carbohydrates for crosslinking in waterborne coatings |
|||
|
38 |
S.Kim Korea, South Core-shell Fabrication of MWCNT-AlN/Poly(phenylene sulfide) Composite for High Thermal Conductivity With Effect of Electrical Insulation. |
|||
|
39 |
A.Dziechciarz, Poland Toxicity of selected fire protective coatings for wood |
|||
|
40 |
E.Sinnema, Netherlands Revisiting autoacceleration in vinyl ester polymerization |
|||
|
41 |
N.Meckbach, Germany NIR Light-induced photo-ATRP with Methacrylates Comprising UV-Absorbers and Their Transfer to Azide-Alkyne Click Chemistry |
|||
|
42 |
A.Szymańska, Poland Alkoxysilane-grafted polybutadienes as effective coating materials |
|||
|
43 |
A.Kostitsyn, Russia The influence of mineral fillers on physical and chemical properties of UV curable coating compositions |
|||
|
44 |
A.Szpecht, Poland Allyl based ionic liquids as polymerization initiators for DGEBA systems |
|||
|
45 |
D.Oprych, Germany Up-Conversion Nanoparticles as Interface between NIR and UV Radiation in Modern Coatings |
|||
|
46 |
J.Zieglerova, Czech Republic A New Styrene Acrylic to Manage Formulation Costs While Maintaining High Performance |
|||
|
47 |
S.Sheikhmou,s Germany Photoinitiation and Depolymerization on Demand with New Hexaarylbiimidazoles in Coatings for the Next Decade |
|||
|
48 |
J.Jurek-Suliga, Poland How can organic coatings stability be traced with modern analytical technique: FTIR spectroscopy and electrochemical Scanning Kelvin Probe |
|||
|
49 |
M.Kohl, Czech Republic The effect of CP’s coated 2D sulphides on corrosive and mechanical properties of organic coatings containing of zinc metal particles. |
|||
|
50 |
C.Schmitz, Germany Digital Database Structures and Workflows for Intelligent Automation |
|||
|
51 |
K.Ollik, Poland Study of anti-corrosion properties of electrophoretically deposited doped graphene oxide coatings |
|||
|
52 |
G.Bissad, Germany Image Recognition and Machine Learning - Substituting Human Vision |
|||
|
53 |
M.Kumosiński, Poland PVB modified with alkyd resins |
|||
|
54 |
H.Siebe, Netherlands Modifying gum arabic to act as binder for water-borne paints |
|||
|
55 |
J.Vlasáková, Czech Republic Application of Nuvolve Engineered PolySaccharides in Coatings |
|||
|
56 |
M.Kaczmarek, Poland Organofunctional polysiloxanes as precursors of hydrophilic materials |
|||
|
57 |
A.Musto, Germany Unique Cobalt-Free Driers for Improved Dry Times and Other Added Benefits in Oxidative Cured Systems |
|||
|
58 |
A.Krasuska, Poland Application of the ATR-FTIR technique for the quantitative analysis of modifiers in polyolefin coatings |
|||
|
59 |
I.Barszczewska-Rybarek, Poland The influence of polyurethane roof insulation thermal aging in air and seawater on structural, physico-chemical and mechanical properties |
|||
|
60 |
P.Dziendzioł, Poland Synthesis of new oligoesterols based on waste poly(ethylene terephthalate) and dimerised fatty acids as a binder for polyurethane organic coatings. |
|||
|
61 |
K.Jędrasiak Poland Experimental research on a hydrophobic, self-regenerating coating for protection of the surface of painted vehicles |
|||
|
62 |
A.Mielańczyk, Poland Surface chemical modification of commercial catheters via SI-ATRP |
|||
|
63 |
A.Issayeva, Kazakhstan Development of water cycles for sewage treatment of dye-finishing production |
|||
|
64 |
D.Zieliński, Poland Latent curing formulations for epoxies with HMTA based ionic liquids as an active ingredient |
|||
|
65 |
A.Przybylska, Poland Hydrophobization of natural fiber surface with organosilicon compounds |
|||
|
66 |
P.Bohacik, Czech Republic Surface Treatments for Bonding of Polyether ether ketone with Thermoset Matrix of Fiber Composites |
|||
|
67 |
Z.Bojarska, Poland Nanosized MoS2 deposited on carbon nanomaterials as the new lubricant additive for engine oils |
|||
|
68 |
A.Kazek - Kęsik, Poland New approach of hybrid layer on titanium dental implants |
|||
| ETCC2020 Congress Presentation Topics | ||
| A. Advances in Sciences of Paints & Coatings, Adhesives, Construction Materials, Printing Inks and related products | ||
| B. Chemical composition, formulations and products specification | ||
| C. Polymers and other raw materials range | ||
| D. Advances in processing and production |
Polish Association of Chemical Engineers
e-mail: etcc2020@sitpchem.org.pl
Federation of Associations of Technicians for Industry of Paints in European Countries
